Tel : +86 21 39885115*808
Mob : +86 17717365886
whatsapp : +86-17717365886
skype : yangyongfe
E-mail : sales@jusolar.com
Office : No. 62, Lane 2811, Zhaochong Highway, Qingpu District, Shanghai
Factory : Jiaxing PV Science Park, No.1288, Kanghe Road Jiaxing City
Copyright © Shanghai Just Solar Co.,Ltd All Right 沪ICP备11039283号 Power By : www.300.cn
Products Center
Poly 260-280W(60)
POLY MODULE
260-280W
High conversion efficiency
High module efficiency to guarantee
power output.
Self-cleaning glass
Coating glass for self-cleaning, reduce
surface dust.
Outstanding low irradiation performance
Excellent module efficiency even in the weak
light conditions, such as morning or cloudy.
Excellent loading capability
2400Pa wind loads, 5400Pa snow loads.
0 to +5W positive tolerance
Detailed information in Electrical
Specifications.
48-hour response service
ELECTRICAL DATA
|
Model Type |
JST260P(60) |
JST265P(60) |
JST270P(60) |
JST275P(60) |
JST280P(60) |
|
Peak Power (Pmax) |
260W |
265W |
270W |
275W |
280W |
|
Module Efficiency |
15.90% |
16.19% |
16.50% |
16.80% |
17.11% |
|
Maximum Power Volage (Vmp) |
31.1V |
31.4V |
31.7V |
32.0V |
32.3V |
|
Maximum Power Current (Imp) |
8.36A |
8.44A |
8.52A |
8.61A |
8.69A |
|
Open Circuit Voltage (Voc) |
38.3V |
38.6V |
38.8V |
39.1V |
39.4V |
|
Short Circuit Current (Isc) |
8.98A |
9.03A |
9.09A |
9.15A |
9.20A |
|
Power Tolerance |
0 to +5W |
||||
|
Maximum System Voltage |
1000V |
||||
|
Nominal Operating Cell Temperature |
44.4±2°C |
||||
|
Maximum Series Fuse Rating |
15A |
||||
MECHNICAL DATA
|
Cell Type |
156×156mm |
|
Number of Cells |
60 (10×6) |
|
Weight |
18.2kg |
|
Dimension |
1650×991×35mm |
|
Max Load |
5400 Pascals |
|
Junction Box |
IP67 rated MC4 |
|
Connector |
Compatible PV |
|
Wire Type |
Wire |
Note: the specifications are obtained under the Standard Test Conditions (STCs): 1000W/m² solar irradiance, 1.5 Air Mass, and cell temperature of 25°C. The NOCT is obtained under the Test Conditions: 800W/m², 20°C ambient temperature, 1m/s wind speed, AM 1.5 spectrum.
This parameters isfor reference only and it is not a part of the contracts. The specifications are subject to change without prior notice.